ironic-inspector.conf¶
DEFAULT¶
-
listen_address
¶ - Type
string
- Default
::
IP to listen on.
-
listen_port
¶ - Type
port number
- Default
5050
- Minimum Value
0
- Maximum Value
65535
Port to listen on.
-
listen_unix_socket
¶ - Type
string
- Default
<None>
Unix socket to listen on. Disables listen_address and listen_port.
-
listen_unix_socket_mode
¶ - Type
unknown type
- Default
<None>
File mode (an octal number) of the unix socket to listen on. Ignored if listen_unix_socket is not set.
-
host
¶ - Type
string
- Default
localhost
This option has a sample default set, which means that its actual default value may vary from the one documented above.
Name of this node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. However, the node name must be valid within an AMQP key, and if using ZeroMQ, a valid hostname, FQDN, or IP address.
-
auth_strategy
¶ - Type
string
- Default
keystone
- Valid Values
noauth, keystone, http_basic
Authentication method used on the ironic-inspector API. “noauth”, “keystone” or “http_basic” are valid options. “noauth” will disable all authentication.
Possible values
- noauth
no authentication
- keystone
use the Identity service for authentication
- http_basic
HTTP basic authentication
-
http_basic_auth_user_file
¶ - Type
string
- Default
/etc/ironic-inspector/htpasswd
Path to Apache format user authentication file used when auth_strategy=http_basic
-
timeout
¶ - Type
integer
- Default
3600
- Maximum Value
315576000
Timeout after which introspection is considered failed, set to 0 to disable.
-
clean_up_period
¶ - Type
integer
- Default
60
- Minimum Value
0
Amount of time in seconds, after which repeat clean up of timed out nodes and old nodes status information. WARNING: If set to a value of 0, then the periodic task is disabled and inspector will not sync with ironic to complete the internal clean-up process. Not advisable if the deployment uses a PXE filter, and will result in the ironic-inspector ceasing periodic cleanup activities.
-
leader_election_interval
¶ - Type
integer
- Default
10
Interval (in seconds) between leader elections.
-
use_ssl
¶ - Type
boolean
- Default
False
SSL Enabled/Disabled
-
max_concurrency
¶ - Type
integer
- Default
1000
- Minimum Value
2
The green thread pool size.
-
introspection_delay
¶ - Type
integer
- Default
5
Delay (in seconds) between two introspections. Only applies when boot is managed by ironic-inspector (i.e. manage_boot==True).
-
ipmi_address_fields
¶ - Type
list
- Default
['redfish_address', 'ilo_address', 'drac_host', 'drac_address', 'ibmc_address']
Ironic driver_info fields that are equivalent to ipmi_address.
-
rootwrap_config
¶ - Type
string
- Default
/etc/ironic-inspector/rootwrap.conf
Path to the rootwrap configuration file to use for running commands as root
-
api_max_limit
¶ - Type
integer
- Default
1000
- Minimum Value
1
Limit the number of elements an API list-call returns
-
can_manage_boot
¶ - Type
boolean
- Default
True
Whether the current installation of ironic-inspector can manage PXE booting of nodes. If set to False, the API will reject introspection requests with manage_boot missing or set to True.
-
enable_mdns
¶ - Type
boolean
- Default
False
Whether to enable publishing the ironic-inspector API endpoint via multicast DNS.
-
standalone
¶ - Type
boolean
- Default
True
Whether to run ironic-inspector as a standalone service. It’s EXPERIMENTAL to set to False.
-
executor_thread_pool_size
¶ - Type
integer
- Default
64
Size of executor thread pool when executor is threading or eventlet.
Deprecated Variations¶ Group
Name
DEFAULT
rpc_thread_pool_size
-
rpc_response_timeout
¶ - Type
integer
- Default
60
Seconds to wait for a response from a call.
-
transport_url
¶ - Type
string
- Default
rabbit://
The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:
driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
Example: rabbit://rabbitmq:password@127.0.0.1:5672//
For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-
control_exchange
¶ - Type
string
- Default
openstack
The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.
-
rpc_ping_enabled
¶ - Type
boolean
- Default
False
Add an endpoint to answer to ping calls. Endpoint is named oslo_rpc_server_ping
-
backdoor_port
¶ - Type
string
- Default
<None>
Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘backdoor_port’ option is deprecated and will be removed in a future release.
-
backdoor_socket
¶ - Type
string
- Default
<None>
Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with ‘backdoor_port’ in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option. Inside the path {pid} will be replaced with the PID of the current process.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘backdoor_socket’ option is deprecated and will be removed in a future release.
-
log_options
¶ - Type
boolean
- Default
True
Enables or disables logging values of all registered options when starting a service (at DEBUG level).
-
graceful_shutdown_timeout
¶ - Type
integer
- Default
60
Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.
-
api_paste_config
¶ - Type
string
- Default
api-paste.ini
File name for the paste.deploy config for api service
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘api_paste_config’ option is deprecated and will be removed in a future release.
-
wsgi_log_format
¶ - Type
string
- Default
%(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f
A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘wsgi_log_format’ option is deprecated and will be removed in a future release.
-
tcp_keepidle
¶ - Type
integer
- Default
600
Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘tcp_keepidle’ option is deprecated and will be removed in a future release.
-
wsgi_default_pool_size
¶ - Type
integer
- Default
100
Size of the pool of greenthreads used by wsgi
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘wsgi_default_pool_size’ option is deprecated and will be removed in a future release.
-
max_header_line
¶ - Type
integer
- Default
16384
Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘max_header_line’ option is deprecated and will be removed in a future release.
-
wsgi_keep_alive
¶ - Type
boolean
- Default
True
If False, closes the client socket connection explicitly.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘wsgi_keep_alive’ option is deprecated and will be removed in a future release.
-
client_socket_timeout
¶ - Type
integer
- Default
900
Timeout for client connections’ socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of ‘0’ means wait forever.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘client_socket_timeout’ option is deprecated and will be removed in a future release.
-
wsgi_server_debug
¶ - Type
boolean
- Default
False
True if the server should send exception tracebacks to the clients on 500 errors. If False, the server will respond with empty bodies.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘wsgi_server_debug’ option is deprecated and will be removed in a future release.
-
debug
¶ - Type
boolean
- Default
False
- Mutable
This option can be changed without restarting.
If set to true, the logging level will be set to DEBUG instead of the default INFO level.
-
log_config_append
¶ - Type
string
- Default
<None>
- Mutable
This option can be changed without restarting.
The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).
Deprecated Variations¶ Group
Name
DEFAULT
log-config
DEFAULT
log_config
-
log_date_format
¶ - Type
string
- Default
%Y-%m-%d %H:%M:%S
Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.
-
log_file
¶ - Type
string
- Default
<None>
(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.
Deprecated Variations¶ Group
Name
DEFAULT
logfile
-
log_dir
¶ - Type
string
- Default
<None>
(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.
Deprecated Variations¶ Group
Name
DEFAULT
logdir
-
watch_log_file
¶ - Type
boolean
- Default
False
Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
This function is known to have bene broken for long time, and depends on the unmaintained library
-
use_syslog
¶ - Type
boolean
- Default
False
Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.
-
use_journal
¶ - Type
boolean
- Default
False
Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.
-
syslog_log_facility
¶ - Type
string
- Default
LOG_USER
Syslog facility to receive log lines. This option is ignored if log_config_append is set.
-
use_json
¶ - Type
boolean
- Default
False
Use JSON formatting for logging. This option is ignored if log_config_append is set.
-
use_stderr
¶ - Type
boolean
- Default
False
Log output to standard error. This option is ignored if log_config_append is set.
-
log_color
¶ - Type
boolean
- Default
False
(Optional) Set the ‘color’ key according to log levels. This option takes effect only when logging to stderr or stdout is used. This option is ignored if log_config_append is set.
-
log_rotate_interval
¶ - Type
integer
- Default
1
The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is set to “interval”.
-
log_rotate_interval_type
¶ - Type
string
- Default
days
- Valid Values
Seconds, Minutes, Hours, Days, Weekday, Midnight
Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.
-
max_logfile_count
¶ - Type
integer
- Default
30
Maximum number of rotated log files.
-
max_logfile_size_mb
¶ - Type
integer
- Default
200
Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.
-
log_rotation_type
¶ - Type
string
- Default
none
- Valid Values
interval, size, none
Log rotation type.
Possible values
- interval
Rotate logs at predefined time intervals.
- size
Rotate logs once they reach a predefined size.
- none
Do not rotate log files.
-
logging_context_format_string
¶ - Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s
Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter
-
logging_default_format_string
¶ - Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter
-
logging_debug_format_suffix
¶ - Type
string
- Default
%(funcName)s %(pathname)s:%(lineno)d
Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter
-
logging_exception_prefix
¶ - Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter
-
logging_user_identity_format
¶ - Type
string
- Default
%(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s
Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-
default_log_levels
¶ - Type
list
- Default
['sqlalchemy=WARNING', 'iso8601=WARNING', 'requests=WARNING', 'urllib3.connectionpool=WARNING', 'keystonemiddleware=WARNING', 'keystoneauth=WARNING', 'ironicclient=WARNING', 'amqp=WARNING', 'amqplib=WARNING', 'stevedore=WARNING', 'oslo.messaging=WARNING', 'oslo_messaging=WARNING']
List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.
-
publish_errors
¶ - Type
boolean
- Default
False
Enables or disables publication of error events.
-
instance_format
¶ - Type
string
- Default
"[instance: %(uuid)s] "
The format for an instance that is passed with the log message.
-
instance_uuid_format
¶ - Type
string
- Default
"[instance: %(uuid)s] "
The format for an instance UUID that is passed with the log message.
-
rate_limit_interval
¶ - Type
integer
- Default
0
Interval, number of seconds, of log rate limiting.
-
rate_limit_burst
¶ - Type
integer
- Default
0
Maximum number of logged messages per rate_limit_interval.
-
rate_limit_except_level
¶ - Type
string
- Default
CRITICAL
- Valid Values
CRITICAL, ERROR, INFO, WARNING, DEBUG, ‘’
Log level name used by rate limiting. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.
-
fatal_deprecations
¶ - Type
boolean
- Default
False
Enables or disables fatal status of deprecations.
capabilities¶
-
boot_mode
¶ - Type
boolean
- Default
False
Whether to store the boot mode (BIOS or UEFI).
-
cpu_flags
¶ - Type
dict
- Default
{'vmx': 'cpu_vt', 'svm': 'cpu_vt', 'aes': 'cpu_aes', 'pse': 'cpu_hugepages', 'pdpe1gb': 'cpu_hugepages_1g', 'smx': 'cpu_txt'}
Mapping between a CPU flag and a capability to set if this flag is present.
coordination¶
-
backend_url
¶ - Type
string
- Default
memcached://localhost:11211
The backend URL to use for distributed coordination. EXPERIMENTAL.
cors¶
-
allowed_origin
¶ - Type
list
- Default
<None>
Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com
-
allow_credentials
¶ - Type
boolean
- Default
True
Indicate that the actual request can include user credentials
-
expose_headers
¶ - Type
list
- Default
[]
Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.
-
max_age
¶ - Type
integer
- Default
3600
Maximum cache age of CORS preflight requests.
-
allow_methods
¶ - Type
list
- Default
['GET', 'POST', 'PUT', 'HEAD', 'PATCH', 'DELETE', 'OPTIONS']
Indicate which methods can be used during the actual request.
-
allow_headers
¶ - Type
list
- Default
['X-Auth-Token', 'X-OpenStack-Ironic-Inspector-API-Minimum-Version', 'X-OpenStack-Ironic-Inspector-API-Maximum-Version', 'X-OpenStack-Ironic-Inspector-API-Version']
Indicate which header field names may be used during the actual request.
database¶
-
sqlite_synchronous
¶ - Type
boolean
- Default
True
If True, SQLite uses synchronous mode.
-
backend
¶ - Type
string
- Default
sqlalchemy
The back end to use for the database.
-
connection
¶ - Type
string
- Default
<None>
The SQLAlchemy connection string to use to connect to the database.
-
slave_connection
¶ - Type
string
- Default
<None>
The SQLAlchemy connection string to use to connect to the slave database.
-
asyncio_connection
¶ - Type
string
- Default
<None>
The SQLAlchemy asyncio connection string to use to connect to the database.
-
asyncio_slave_connection
¶ - Type
string
- Default
<None>
The SQLAlchemy asyncio connection string to use to connect to the slave database.
-
mysql_sql_mode
¶ - Type
string
- Default
TRADITIONAL
The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=
-
mysql_wsrep_sync_wait
¶ - Type
integer
- Default
<None>
For Galera only, configure wsrep_sync_wait causality checks on new connections. Default is None, meaning don’t configure any setting.
-
connection_recycle_time
¶ - Type
integer
- Default
3600
Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.
-
max_pool_size
¶ - Type
integer
- Default
5
Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.
-
max_retries
¶ - Type
integer
- Default
10
Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.
-
retry_interval
¶ - Type
integer
- Default
10
Interval between retries of opening a SQL connection.
-
max_overflow
¶ - Type
integer
- Default
50
If set, use this value for max_overflow with SQLAlchemy.
-
connection_debug
¶ - Type
integer
- Default
0
- Minimum Value
0
- Maximum Value
100
Verbosity of SQL debugging information: 0=None, 100=Everything.
-
connection_trace
¶ - Type
boolean
- Default
False
Add Python stack traces to SQL as comment strings.
-
pool_timeout
¶ - Type
integer
- Default
<None>
If set, use this value for pool_timeout with SQLAlchemy.
-
use_db_reconnect
¶ - Type
boolean
- Default
False
Enable the experimental use of database reconnect on connection lost.
-
db_retry_interval
¶ - Type
integer
- Default
1
Seconds between retries of a database transaction.
-
db_inc_retry_interval
¶ - Type
boolean
- Default
True
If True, increases the interval between retries of a database operation up to db_max_retry_interval.
-
db_max_retry_interval
¶ - Type
integer
- Default
10
If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.
-
db_max_retries
¶ - Type
integer
- Default
20
Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.
-
connection_parameters
¶ - Type
string
- Default
''
Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1¶m2=value2&…
discovery¶
-
enroll_node_driver
¶ - Type
string
- Default
fake-hardware
The name of the Ironic driver used by the enroll hook when creating a new node in Ironic.
-
enroll_node_fields
¶ - Type
dict
- Default
{}
Additional fields to set on newly discovered nodes.
-
enabled_bmc_address_version
¶ - Type
list
- Default
['4', '6']
IP version of BMC address that will be used when enrolling a new node in Ironic. Defaults to “4,6”. Could be “4” (use v4 address only), “4,6” (v4 address have higher priority and if both addresses found v6 version is ignored), “6,4” (v6 is desired but fall back to v4 address for BMCs having v4 address, opposite to “4,6”), “6” (use v6 address only and ignore v4 version).
dnsmasq_pxe_filter¶
-
dhcp_hostsdir
¶ - Type
string
- Default
/var/lib/ironic-inspector/dhcp-hostsdir
The MAC address cache directory, exposed to dnsmasq.This directory is expected to be in exclusive control of the driver.
-
purge_dhcp_hostsdir
¶ - Type
boolean
- Default
True
Purge the hostsdir upon driver initialization. Setting to false should only be performed when the deployment of inspector is such that there are multiple processes executing inside of the same host and namespace. In this case, the Operator is responsible for setting up a custom cleaning facility.
-
dnsmasq_start_command
¶ - Type
string
- Default
''
A (shell) command line to start the dnsmasq service upon filter initialization. Default: don’t start.
-
dnsmasq_stop_command
¶ - Type
string
- Default
''
A (shell) command line to stop the dnsmasq service upon inspector (error) exit. Default: don’t stop.
exception¶
-
fatal_exception_format_errors
¶ - Type
boolean
- Default
False
Used if there is a formatting error when generating an exception message (a programming error). If True, raise an exception; if False, use the unformatted message.
Deprecated Variations¶ Group
Name
ironic_lib
fatal_exception_format_errors
extra_hardware¶
-
strict
¶ - Type
boolean
- Default
False
If True, refuse to parse extra data if at least one record is too short. Additionally, remove the incoming “data” even if parsing failed.
healthcheck¶
-
enabled
¶ - Type
boolean
- Default
False
Enable the health check endpoint at /healthcheck. Note that this is unauthenticated. More information is available at https://docs.openstack.org/oslo.middleware/latest/reference/healthcheck_plugins.html.
-
path
¶ - Type
string
- Default
/healthcheck
The path to respond to healtcheck requests on.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
-
detailed
¶ - Type
boolean
- Default
False
Show more detailed information as part of the response. Security note: Enabling this option may expose sensitive details about the service being monitored. Be sure to verify that it will not violate your security policies.
-
backends
¶ - Type
list
- Default
[]
Additional backends that can perform health checks and report that information back as part of a request.
-
allowed_source_ranges
¶ - Type
list
- Default
[]
A list of network addresses to limit source ip allowed to access healthcheck information. Any request from ip outside of these network addresses are ignored.
-
ignore_proxied_requests
¶ - Type
boolean
- Default
False
Ignore requests with proxy headers.
-
disable_by_file_path
¶ - Type
string
- Default
<None>
Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin.
-
disable_by_file_paths
¶ - Type
list
- Default
[]
Check the presence of a file based on a port to determine if an application is running on a port. Expects a “port:path” list of strings. Used by DisableByFilesPortsHealthcheck plugin.
-
enable_by_file_paths
¶ - Type
list
- Default
[]
Check the presence of files. Used by EnableByFilesHealthcheck plugin.
iptables¶
-
dnsmasq_interface
¶ - Type
string
- Default
br-ctlplane
Interface on which dnsmasq listens, the default is for VM’s.
-
firewall_chain
¶ - Type
string
- Default
ironic-inspector
iptables chain name to use.
-
ethoib_interfaces
¶ - Type
list
- Default
[]
List of Ethernet Over InfiniBand interfaces on the Inspector host which are used for physical access to the DHCP network. Multiple interfaces would be attached to a bond or bridge specified in dnsmasq_interface. The MACs of the InfiniBand nodes which are not in desired state are going to be blocked based on the list of neighbor MACs on these interfaces.
-
ip_version
¶ - Type
string
- Default
4
- Valid Values
4, 6
The IP version that will be used for iptables filter. Defaults to 4.
Possible values
- 4
IPv4
- 6
IPv6
ironic¶
-
auth_url
¶ - Type
unknown type
- Default
<None>
Authentication URL
-
auth_type
¶ - Type
unknown type
- Default
<None>
Authentication type to load
Deprecated Variations¶ Group
Name
ironic
auth_plugin
-
cafile
¶ - Type
string
- Default
<None>
PEM encoded Certificate Authority to use when verifying HTTPs connections.
-
certfile
¶ - Type
string
- Default
<None>
PEM encoded client certificate cert file
-
collect_timing
¶ - Type
boolean
- Default
False
Collect per-API call timing information.
-
connect_retries
¶ - Type
integer
- Default
<None>
The maximum number of retries that should be attempted for connection errors.
-
connect_retry_delay
¶ - Type
floating point
- Default
<None>
Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.
-
default_domain_id
¶ - Type
unknown type
- Default
<None>
Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
-
default_domain_name
¶ - Type
unknown type
- Default
<None>
Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
-
domain_id
¶ - Type
unknown type
- Default
<None>
Domain ID to scope to
-
domain_name
¶ - Type
unknown type
- Default
<None>
Domain name to scope to
-
endpoint_override
¶ - Type
string
- Default
<None>
Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.
-
insecure
¶ - Type
boolean
- Default
False
Verify HTTPS connections.
-
keyfile
¶ - Type
string
- Default
<None>
PEM encoded client certificate key file
-
max_version
¶ - Type
string
- Default
<None>
The maximum major version of a given API, intended to be used as the upper bound of a range with min_version. Mutually exclusive with version.
-
max_retries
¶ - Type
integer
- Default
30
Maximum number of retries in case of conflict error (HTTP 409).
-
min_version
¶ - Type
string
- Default
<None>
The minimum major version of a given API, intended to be used as the lower bound of a range with max_version. Mutually exclusive with version. If min_version is given with no max_version it is as if max version is “latest”.
-
password
¶ - Type
unknown type
- Default
<None>
User’s password
-
project_domain_id
¶ - Type
unknown type
- Default
<None>
Domain ID containing project
-
project_domain_name
¶ - Type
unknown type
- Default
<None>
Domain name containing project
-
project_id
¶ - Type
unknown type
- Default
<None>
Project ID to scope to
Deprecated Variations¶ Group
Name
ironic
tenant-id
ironic
tenant_id
-
project_name
¶ - Type
unknown type
- Default
<None>
Project name to scope to
Deprecated Variations¶ Group
Name
ironic
tenant-name
ironic
tenant_name
-
region_name
¶ - Type
string
- Default
<None>
The default region_name for endpoint URL discovery.
-
retriable_status_codes
¶ - Type
list
- Default
<None>
List of retriable HTTP status codes that should be retried. If not set default to [503]
-
retry_interval
¶ - Type
integer
- Default
2
Interval between retries in case of conflict error (HTTP 409).
-
service_name
¶ - Type
string
- Default
<None>
The default service_name for endpoint URL discovery.
-
service_type
¶ - Type
string
- Default
baremetal
The default service_type for endpoint URL discovery.
-
split_loggers
¶ - Type
boolean
- Default
False
Log requests to multiple loggers.
-
status_code_retries
¶ - Type
integer
- Default
<None>
The maximum number of retries that should be attempted for retriable HTTP status codes.
-
status_code_retry_delay
¶ - Type
floating point
- Default
<None>
Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.
-
system_scope
¶ - Type
unknown type
- Default
<None>
Scope for system operations
-
tenant_id
¶ - Type
unknown type
- Default
<None>
Tenant ID
-
tenant_name
¶ - Type
unknown type
- Default
<None>
Tenant Name
-
timeout
¶ - Type
integer
- Default
<None>
Timeout value for http requests
-
trust_id
¶ - Type
unknown type
- Default
<None>
ID of the trust to use as a trustee use
-
user_domain_id
¶ - Type
unknown type
- Default
<None>
User’s domain id
-
user_domain_name
¶ - Type
unknown type
- Default
<None>
User’s domain name
-
user_id
¶ - Type
unknown type
- Default
<None>
User id
-
username
¶ - Type
unknown type
- Default
<None>
Username
Deprecated Variations¶ Group
Name
ironic
user-name
ironic
user_name
-
valid_interfaces
¶ - Type
list
- Default
['internal', 'public']
List of interfaces, in order of preference, for endpoint URL.
-
version
¶ - Type
string
- Default
<None>
Minimum Major API version within a given Major API version for endpoint URL discovery. Mutually exclusive with min_version and max_version
keystone_authtoken¶
-
www_authenticate_uri
¶ - Type
string
- Default
<None>
Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.
Deprecated Variations¶ Group
Name
keystone_authtoken
auth_uri
-
auth_uri
¶ - Type
string
- Default
<None>
Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.
Warning
This option is deprecated for removal since Queens. Its value may be silently ignored in the future.
- Reason
The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.
-
auth_version
¶ - Type
string
- Default
<None>
API version of the Identity API endpoint.
-
interface
¶ - Type
string
- Default
internal
Interface to use for the Identity API endpoint. Valid values are “public”, “internal” (default) or “admin”.
-
delay_auth_decision
¶ - Type
boolean
- Default
False
Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.
-
http_connect_timeout
¶ - Type
integer
- Default
<None>
Request timeout value for communicating with Identity API server.
-
http_request_max_retries
¶ - Type
integer
- Default
3
How many times are we trying to reconnect when communicating with Identity API Server.
-
cache
¶ - Type
string
- Default
<None>
Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the
memcached_servers
option instead.
-
certfile
¶ - Type
string
- Default
<None>
Required if identity server requires client certificate
-
keyfile
¶ - Type
string
- Default
<None>
Required if identity server requires client certificate
-
cafile
¶ - Type
string
- Default
<None>
A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.
-
insecure
¶ - Type
boolean
- Default
False
Verify HTTPS connections.
-
region_name
¶ - Type
string
- Default
<None>
The region in which the identity server can be found.
-
memcached_servers
¶ - Type
list
- Default
<None>
Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.
Deprecated Variations¶ Group
Name
keystone_authtoken
memcache_servers
-
token_cache_time
¶ - Type
integer
- Default
300
In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.
-
memcache_security_strategy
¶ - Type
string
- Default
None
- Valid Values
None, MAC, ENCRYPT
(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.
-
memcache_secret_key
¶ - Type
string
- Default
<None>
(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.
-
memcache_tls_enabled
¶ - Type
boolean
- Default
False
(Optional) Global toggle for TLS usage when comunicating with the caching servers.
-
memcache_tls_cafile
¶ - Type
string
- Default
<None>
(Optional) Path to a file of concatenated CA certificates in PEM format necessary to establish the caching server’s authenticity. If tls_enabled is False, this option is ignored.
-
memcache_tls_certfile
¶ - Type
string
- Default
<None>
(Optional) Path to a single file in PEM format containing the client’s certificate as well as any number of CA certificates needed to establish the certificate’s authenticity. This file is only required when client side authentication is necessary. If tls_enabled is False, this option is ignored.
-
memcache_tls_keyfile
¶ - Type
string
- Default
<None>
(Optional) Path to a single file containing the client’s private key in. Otherwhise the private key will be taken from the file specified in tls_certfile. If tls_enabled is False, this option is ignored.
-
memcache_tls_allowed_ciphers
¶ - Type
string
- Default
<None>
(Optional) Set the available ciphers for sockets created with the TLS context. It should be a string in the OpenSSL cipher list format. If not specified, all OpenSSL enabled ciphers will be available.
-
memcache_pool_dead_retry
¶ - Type
integer
- Default
300
(Optional) Number of seconds memcached server is considered dead before it is tried again.
-
memcache_pool_maxsize
¶ - Type
integer
- Default
10
(Optional) Maximum total number of open connections to every memcached server.
-
memcache_pool_socket_timeout
¶ - Type
integer
- Default
3
(Optional) Socket timeout in seconds for communicating with a memcached server.
-
memcache_pool_unused_timeout
¶ - Type
integer
- Default
60
(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.
-
memcache_pool_conn_get_timeout
¶ - Type
integer
- Default
10
(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.
-
memcache_use_advanced_pool
¶ - Type
boolean
- Default
True
(Optional) Use the advanced (eventlet safe) memcached client pool.
-
include_service_catalog
¶ - Type
boolean
- Default
True
(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.
-
enforce_token_bind
¶ - Type
string
- Default
permissive
Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.
-
service_token_roles
¶ - Type
list
- Default
['service']
A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.
-
service_token_roles_required
¶ - Type
boolean
- Default
False
For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.
-
service_type
¶ - Type
string
- Default
<None>
The name or type of the service as it appears in the service catalog. This is used to validate tokens that have restricted access rules.
-
memcache_sasl_enabled
¶ - Type
boolean
- Default
False
Enable the SASL(Simple Authentication and Security Layer) if the SASL_enable is true, else disable.
-
memcache_username
¶ - Type
string
- Default
''
the user name for the SASL
-
memcache_password
¶ - Type
string
- Default
''
the username password for SASL
-
auth_type
¶ - Type
unknown type
- Default
<None>
Authentication type to load
Deprecated Variations¶ Group
Name
keystone_authtoken
auth_plugin
-
auth_section
¶ - Type
unknown type
- Default
<None>
Config Section from which to load plugin specific options
mdns¶
-
registration_attempts
¶ - Type
integer
- Default
5
- Minimum Value
1
Number of attempts to register a service. Currently has to be larger than 1 because of race conditions in the zeroconf library.
-
lookup_attempts
¶ - Type
integer
- Default
3
- Minimum Value
1
Number of attempts to lookup a service.
-
params
¶ - Type
unknown type
- Default
{}
Additional parameters to pass for the registered service.
-
interfaces
¶ - Type
list
- Default
<None>
List of IP addresses of interfaces to use for mDNS. Defaults to all interfaces on the system.
oslo_messaging_kafka¶
-
kafka_max_fetch_bytes
¶ - Type
integer
- Default
1048576
Max fetch bytes of Kafka consumer
-
kafka_consumer_timeout
¶ - Type
floating point
- Default
1.0
Default timeout(s) for Kafka consumers
-
consumer_group
¶ - Type
string
- Default
oslo_messaging_consumer
Group id for Kafka consumer. Consumers in one group will coordinate message consumption
-
producer_batch_timeout
¶ - Type
floating point
- Default
0.0
Upper bound on the delay for KafkaProducer batching in seconds
-
producer_batch_size
¶ - Type
integer
- Default
16384
Size of batch for the producer async send
-
compression_codec
¶ - Type
string
- Default
none
- Valid Values
none, gzip, snappy, lz4, zstd
The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version
-
enable_auto_commit
¶ - Type
boolean
- Default
False
Enable asynchronous consumer commits
-
max_poll_records
¶ - Type
integer
- Default
500
The maximum number of records returned in a poll call
-
security_protocol
¶ - Type
string
- Default
PLAINTEXT
- Valid Values
PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL
Protocol used to communicate with brokers
-
sasl_mechanism
¶ - Type
string
- Default
PLAIN
Mechanism when security protocol is SASL
-
ssl_cafile
¶ - Type
string
- Default
''
CA certificate PEM file used to verify the server certificate
-
ssl_client_cert_file
¶ - Type
string
- Default
''
Client certificate PEM file used for authentication.
-
ssl_client_key_file
¶ - Type
string
- Default
''
Client key PEM file used for authentication.
-
ssl_client_key_password
¶ - Type
string
- Default
''
Client key password file used for authentication.
oslo_messaging_notifications¶
-
driver
¶ - Type
multi-valued
- Default
''
The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop
-
transport_url
¶ - Type
string
- Default
<None>
A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.
-
topics
¶ - Type
list
- Default
['notifications']
AMQP topic used for OpenStack notifications.
-
retry
¶ - Type
integer
- Default
-1
The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
oslo_messaging_rabbit¶
-
amqp_durable_queues
¶ - Type
boolean
- Default
False
Use durable queues in AMQP. If rabbit_quorum_queue is enabled, queues will be durable and this value will be ignored.
-
amqp_auto_delete
¶ - Type
boolean
- Default
False
Auto-delete queues in AMQP.
-
rpc_conn_pool_size
¶ - Type
integer
- Default
30
- Minimum Value
1
Size of RPC connection pool.
-
conn_pool_min_size
¶ - Type
integer
- Default
2
The pool size limit for connections expiration policy
-
conn_pool_ttl
¶ - Type
integer
- Default
1200
The time-to-live in sec of idle connections in the pool
-
ssl
¶ - Type
boolean
- Default
False
Connect over SSL.
-
ssl_version
¶ - Type
string
- Default
''
SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.
-
ssl_key_file
¶ - Type
string
- Default
''
SSL key file (valid only if SSL enabled).
-
ssl_cert_file
¶ - Type
string
- Default
''
SSL cert file (valid only if SSL enabled).
-
ssl_ca_file
¶ - Type
string
- Default
''
SSL certification authority file (valid only if SSL enabled).
-
ssl_enforce_fips_mode
¶ - Type
boolean
- Default
False
Global toggle for enforcing the OpenSSL FIPS mode. This feature requires Python support. This is available in Python 3.9 in all environments and may have been backported to older Python versions on select environments. If the Python executable used does not support OpenSSL FIPS mode, an exception will be raised.
-
heartbeat_in_pthread
¶ - Type
boolean
- Default
False
(DEPRECATED) It is recommend not to use this option anymore. Run the health check heartbeat thread through a native python thread by default. If this option is equal to False then the health check heartbeat will inherit the execution model from the parent process. For example if the parent process has monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread. This option should be set to True only for the wsgi services.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The option is related to Eventlet which will be removed. In addition this has never worked as expected with services using eventlet for core service framework.
-
kombu_reconnect_delay
¶ - Type
floating point
- Default
1.0
- Minimum Value
0.0
- Maximum Value
4.5
How long to wait (in seconds) before reconnecting in response to an AMQP consumer cancel notification.
-
kombu_reconnect_splay
¶ - Type
floating point
- Default
0.0
- Minimum Value
0.0
Random time to wait for when reconnecting in response to an AMQP consumer cancel notification.
-
kombu_compression
¶ - Type
string
- Default
<None>
EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.
-
kombu_missing_consumer_retry_timeout
¶ - Type
integer
- Default
60
How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.
Deprecated Variations¶ Group
Name
oslo_messaging_rabbit
kombu_reconnect_timeout
-
kombu_failover_strategy
¶ - Type
string
- Default
round-robin
- Valid Values
round-robin, shuffle
Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.
-
rabbit_login_method
¶ - Type
string
- Default
AMQPLAIN
- Valid Values
PLAIN, AMQPLAIN, EXTERNAL, RABBIT-CR-DEMO
The RabbitMQ login method.
-
rabbit_retry_interval
¶ - Type
integer
- Default
1
- Minimum Value
1
How frequently to retry connecting with RabbitMQ.
-
rabbit_retry_backoff
¶ - Type
integer
- Default
2
- Minimum Value
0
How long to backoff for between retries when connecting to RabbitMQ.
-
rabbit_interval_max
¶ - Type
integer
- Default
30
- Minimum Value
1
Maximum interval of RabbitMQ connection retries.
-
rabbit_ha_queues
¶ - Type
boolean
- Default
False
Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “
-
rabbit_quorum_queue
¶ - Type
boolean
- Default
False
Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum queue is a modern queue type for RabbitMQ implementing a durable, replicated FIFO queue based on the Raft consensus algorithm. It is available as of RabbitMQ 3.8.0. If set this option will conflict with the HA queues (
rabbit_ha_queues
) aka mirrored queues, in other words the HA queues should be disabled. Quorum queues are also durable by default so the amqp_durable_queues option is ignored when this option is enabled.
-
rabbit_transient_quorum_queue
¶ - Type
boolean
- Default
False
Use quorum queues for transients queues in RabbitMQ. Enabling this option will then make sure those queues are also using quorum kind of rabbit queues, which are HA by default.
-
rabbit_quorum_delivery_limit
¶ - Type
integer
- Default
0
Each time a message is redelivered to a consumer, a counter is incremented. Once the redelivery count exceeds the delivery limit the message gets dropped or dead-lettered (if a DLX exchange has been configured) Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
-
rabbit_quorum_max_memory_length
¶ - Type
integer
- Default
0
By default all messages are maintained in memory if a quorum queue grows in length it can put memory pressure on a cluster. This option can limit the number of messages in the quorum queue. Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
-
rabbit_quorum_max_memory_bytes
¶ - Type
integer
- Default
0
By default all messages are maintained in memory if a quorum queue grows in length it can put memory pressure on a cluster. This option can limit the number of memory bytes used by the quorum queue. Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
-
rabbit_transient_queues_ttl
¶ - Type
integer
- Default
1800
- Minimum Value
0
Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues. Setting 0 as value will disable the x-expires. If doing so, make sure you have a rabbitmq policy to delete the queues or you deployment will create an infinite number of queue over time.In case rabbit_stream_fanout is set to True, this option will control data retention policy (x-max-age) for messages in the fanout queue rather then the queue duration itself. So the oldest data in the stream queue will be discarded from it once reaching TTL Setting to 0 will disable x-max-age for stream which make stream grow indefinitely filling up the diskspace
-
rabbit_qos_prefetch_count
¶ - Type
integer
- Default
0
Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.
-
heartbeat_timeout_threshold
¶ - Type
integer
- Default
60
Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).
-
heartbeat_rate
¶ - Type
integer
- Default
3
How often times during the heartbeat_timeout_threshold we check the heartbeat.
-
direct_mandatory_flag
¶ - Type
boolean
- Default
True
(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Mandatory flag no longer deactivable.
-
enable_cancel_on_failover
¶ - Type
boolean
- Default
False
Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down
-
use_queue_manager
¶ - Type
boolean
- Default
False
Should we use consistant queue names or random ones
-
hostname
¶ - Type
string
- Default
node1.example.com
This option has a sample default set, which means that its actual default value may vary from the one documented above.
Hostname used by queue manager. Defaults to the value returned by socket.gethostname().
-
processname
¶ - Type
string
- Default
nova-api
This option has a sample default set, which means that its actual default value may vary from the one documented above.
Process name used by queue manager
-
rabbit_stream_fanout
¶ - Type
boolean
- Default
False
Use stream queues in RabbitMQ (x-queue-type: stream). Streams are a new persistent and replicated data structure (“queue type”) in RabbitMQ which models an append-only log with non-destructive consumer semantics. It is available as of RabbitMQ 3.9.0. If set this option will replace all fanout queues with only one stream queue.
oslo_policy¶
-
enforce_scope
¶ - Type
boolean
- Default
True
This option controls whether or not to enforce scope when evaluating policies. If
True
, the scope of the token used in the request is compared to thescope_types
of the policy being enforced. If the scopes do not match, anInvalidScope
exception will be raised. IfFalse
, a message will be logged informing operators that policies are being invoked with mismatching scope.Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
This configuration was added temporarily to facilitate a smooth transition to the new RBAC. OpenStack will always enforce scope checks. This configuration option is deprecated and will be removed in the 2025.2 cycle.
-
enforce_new_defaults
¶ - Type
boolean
- Default
True
This option controls whether or not to use old deprecated defaults when evaluating policies. If
True
, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with theenforce_scope
flag so that you can get the benefits of new defaults andscope_type
together. IfFalse
, the deprecated policy check string is logically OR’d with the new policy check string, allowing for a graceful upgrade experience between releases with new policies, which is the default behavior.
-
policy_file
¶ - Type
string
- Default
policy.yaml
The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.
-
policy_default_rule
¶ - Type
string
- Default
default
Default rule. Enforced when a requested rule is not found.
-
policy_dirs
¶ - Type
multi-valued
- Default
policy.d
Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.
-
remote_content_type
¶ - Type
string
- Default
application/x-www-form-urlencoded
- Valid Values
application/x-www-form-urlencoded, application/json
Content Type to send and receive data for REST based policy check
-
remote_ssl_verify_server_crt
¶ - Type
boolean
- Default
False
server identity verification for REST based policy check
-
remote_ssl_ca_crt_file
¶ - Type
string
- Default
<None>
Absolute path to ca cert file for REST based policy check
-
remote_ssl_client_crt_file
¶ - Type
string
- Default
<None>
Absolute path to client cert for REST based policy check
-
remote_ssl_client_key_file
¶ - Type
string
- Default
<None>
Absolute path client key file REST based policy check
-
remote_timeout
¶ - Type
floating point
- Default
60
- Minimum Value
0
Timeout in seconds for REST based policy check
pci_devices¶
-
alias
¶ - Type
multi-valued
- Default
''
An alias for PCI device identified by ‘vendor_id’ and ‘product_id’ fields. Format: {“vendor_id”: “1234”, “product_id”: “5678”, “name”: “pci_dev1”}
port_physnet¶
-
cidr_map
¶ - Type
list
- Default
10.10.10.0/24:physnet_a,2001:db8::/64:physnet_b
This option has a sample default set, which means that its actual default value may vary from the one documented above.
Mapping of IP subnet CIDR to physical network. When the physnet_cidr_map processing hook is enabled the physical_network property of baremetal ports is populated based on this mapping.
processing¶
-
add_ports
¶ - Type
string
- Default
pxe
- Valid Values
all, active, pxe, disabled
Which MAC addresses to add as ports during introspection. Possible values: all (all MAC addresses), active (MAC addresses of NIC with IP addresses), pxe (only MAC address of NIC node PXE booted from, falls back to “active” if PXE MAC is not supplied by the ramdisk).
-
keep_ports
¶ - Type
string
- Default
all
- Valid Values
all, present, added
Which ports (already present on a node) to keep after introspection. Possible values: all (do not delete anything), present (keep ports which MACs were present in introspection data), added (keep only MACs that we added during introspection).
-
overwrite_existing
¶ - Type
boolean
- Default
True
Whether to overwrite existing values in node database. Disable this option to make introspection a non-destructive operation.
-
default_processing_hooks
¶ - Type
string
- Default
ramdisk_error,root_disk_selection,scheduler,validate_interfaces,capabilities,pci_devices
Comma-separated list of default hooks for processing pipeline. Hook ‘scheduler’ updates the node with the minimum properties required by the Nova scheduler. Hook ‘validate_interfaces’ ensures that valid NIC data was provided by the ramdisk. Do not exclude these two unless you really know what you’re doing.
-
processing_hooks
¶ - Type
string
- Default
$default_processing_hooks
Comma-separated list of enabled hooks for processing pipeline. The default for this is $default_processing_hooks, hooks can be added before or after the defaults like this: “prehook,$default_processing_hooks,posthook”.
-
ramdisk_logs_dir
¶ - Type
string
- Default
<None>
If set, logs from ramdisk will be stored in this directory.
-
always_store_ramdisk_logs
¶ - Type
boolean
- Default
False
Whether to store ramdisk logs even if it did not return an error message (dependent upon “ramdisk_logs_dir” option being set).
-
node_not_found_hook
¶ - Type
string
- Default
<None>
The name of the hook to run when inspector receives inspection information from a node it isn’t already aware of. This hook is ignored by default.
-
store_data
¶ - Type
string
- Default
none
The storage backend for storing introspection data. Possible values are: ‘none’, ‘database’ and ‘swift’. If set to ‘none’, introspection data will not be stored.
-
disk_partitioning_spacing
¶ - Type
boolean
- Default
True
Whether to leave 1 GiB of disk size untouched for partitioning. Only has effect when used with the IPA as a ramdisk, for older ramdisk local_gb is calculated on the ramdisk side.
-
ramdisk_logs_filename_format
¶ - Type
string
- Default
{uuid}_{dt:%Y%m%d-%H%M%S.%f}.tar.gz
File name template for storing ramdisk logs. The following replacements can be used: {uuid} - node UUID or “unknown”, {bmc} - node BMC address or “unknown”, {dt} - current UTC date and time, {mac} - PXE booting MAC or “unknown”.
-
power_off
¶ - Type
boolean
- Default
True
Whether to power off a node after introspection. Nodes in active or rescue states which submit introspection data will be left on if the feature is enabled via the ‘permit_active_introspection’ configuration option.
-
permit_active_introspection
¶ - Type
boolean
- Default
False
Whether to process nodes that are in running states.
-
update_pxe_enabled
¶ - Type
boolean
- Default
True
Whether to update the pxe_enabled value according to the introspection data. This option has no effect if [processing]overwrite_existing is set to False
pxe_filter¶
-
driver
¶ - Type
string
- Default
iptables
PXE boot filter driver to use, possible filters are: “iptables”, “dnsmasq” and “noop”. Set “noop ” to disable the firewall filtering.
-
sync_period
¶ - Type
integer
- Default
15
- Minimum Value
0
Amount of time in seconds, after which repeat periodic update of the filter.
-
deny_unknown_macs
¶ - Type
boolean
- Default
False
By default inspector will open the DHCP server for any node when introspection is active. Opening DHCP for unknown MAC addresses when introspection is active allow for users to add nodes with no ports to ironic and have ironic-inspector enroll ports based on node introspection results. NOTE: If this option is True, nodes must have at least one enrolled port prior to introspection.
service_catalog¶
-
auth_url
¶ - Type
unknown type
- Default
<None>
Authentication URL
-
auth_type
¶ - Type
unknown type
- Default
<None>
Authentication type to load
Deprecated Variations¶ Group
Name
service_catalog
auth_plugin
-
cafile
¶ - Type
string
- Default
<None>
PEM encoded Certificate Authority to use when verifying HTTPs connections.
-
certfile
¶ - Type
string
- Default
<None>
PEM encoded client certificate cert file
-
collect_timing
¶ - Type
boolean
- Default
False
Collect per-API call timing information.
-
connect_retries
¶ - Type
integer
- Default
<None>
The maximum number of retries that should be attempted for connection errors.
-
connect_retry_delay
¶ - Type
floating point
- Default
<None>
Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.
-
default_domain_id
¶ - Type
unknown type
- Default
<None>
Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
-
default_domain_name
¶ - Type
unknown type
- Default
<None>
Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
-
domain_id
¶ - Type
unknown type
- Default
<None>
Domain ID to scope to
-
domain_name
¶ - Type
unknown type
- Default
<None>
Domain name to scope to
-
endpoint_override
¶ - Type
string
- Default
<None>
Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.
-
insecure
¶ - Type
boolean
- Default
False
Verify HTTPS connections.
-
keyfile
¶ - Type
string
- Default
<None>
PEM encoded client certificate key file
-
max_version
¶ - Type
string
- Default
<None>
The maximum major version of a given API, intended to be used as the upper bound of a range with min_version. Mutually exclusive with version.
-
min_version
¶ - Type
string
- Default
<None>
The minimum major version of a given API, intended to be used as the lower bound of a range with max_version. Mutually exclusive with version. If min_version is given with no max_version it is as if max version is “latest”.
-
password
¶ - Type
unknown type
- Default
<None>
User’s password
-
project_domain_id
¶ - Type
unknown type
- Default
<None>
Domain ID containing project
-
project_domain_name
¶ - Type
unknown type
- Default
<None>
Domain name containing project
-
project_id
¶ - Type
unknown type
- Default
<None>
Project ID to scope to
Deprecated Variations¶ Group
Name
service_catalog
tenant-id
service_catalog
tenant_id
-
project_name
¶ - Type
unknown type
- Default
<None>
Project name to scope to
Deprecated Variations¶ Group
Name
service_catalog
tenant-name
service_catalog
tenant_name
-
region_name
¶ - Type
string
- Default
<None>
The default region_name for endpoint URL discovery.
-
retriable_status_codes
¶ - Type
list
- Default
<None>
List of retriable HTTP status codes that should be retried. If not set default to [503]
-
service_name
¶ - Type
string
- Default
<None>
The default service_name for endpoint URL discovery.
-
service_type
¶ - Type
string
- Default
baremetal-introspection
The default service_type for endpoint URL discovery.
-
split_loggers
¶ - Type
boolean
- Default
False
Log requests to multiple loggers.
-
status_code_retries
¶ - Type
integer
- Default
<None>
The maximum number of retries that should be attempted for retriable HTTP status codes.
-
status_code_retry_delay
¶ - Type
floating point
- Default
<None>
Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.
-
system_scope
¶ - Type
unknown type
- Default
<None>
Scope for system operations
-
tenant_id
¶ - Type
unknown type
- Default
<None>
Tenant ID
-
tenant_name
¶ - Type
unknown type
- Default
<None>
Tenant Name
-
timeout
¶ - Type
integer
- Default
<None>
Timeout value for http requests
-
trust_id
¶ - Type
unknown type
- Default
<None>
ID of the trust to use as a trustee use
-
user_domain_id
¶ - Type
unknown type
- Default
<None>
User’s domain id
-
user_domain_name
¶ - Type
unknown type
- Default
<None>
User’s domain name
-
user_id
¶ - Type
unknown type
- Default
<None>
User id
-
username
¶ - Type
unknown type
- Default
<None>
Username
Deprecated Variations¶ Group
Name
service_catalog
user-name
service_catalog
user_name
-
valid_interfaces
¶ - Type
list
- Default
['internal', 'public']
List of interfaces, in order of preference, for endpoint URL.
-
version
¶ - Type
string
- Default
<None>
Minimum Major API version within a given Major API version for endpoint URL discovery. Mutually exclusive with min_version and max_version
ssl¶
-
ca_file
¶ - Type
string
- Default
<None>
CA certificate file to use to verify connecting clients.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘ca_file’ option is deprecated and will be removed in a future release.
-
cert_file
¶ - Type
string
- Default
<None>
Certificate file to use when starting the server securely.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘cert_file’ option is deprecated and will be removed in a future release.
-
key_file
¶ - Type
string
- Default
<None>
Private key file to use when starting the server securely.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘key_file’ option is deprecated and will be removed in a future release.
-
version
¶ - Type
string
- Default
<None>
SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘version’ option is deprecated and will be removed in a future release.
-
ciphers
¶ - Type
string
- Default
<None>
Sets the list of available ciphers. value should be a string in the OpenSSL cipher list format.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
The ‘ciphers’ option is deprecated and will be removed in a future release.
swift¶
-
auth_url
¶ - Type
unknown type
- Default
<None>
Authentication URL
-
auth_type
¶ - Type
unknown type
- Default
<None>
Authentication type to load
Deprecated Variations¶ Group
Name
swift
auth_plugin
-
cafile
¶ - Type
string
- Default
<None>
PEM encoded Certificate Authority to use when verifying HTTPs connections.
-
certfile
¶ - Type
string
- Default
<None>
PEM encoded client certificate cert file
-
collect_timing
¶ - Type
boolean
- Default
False
Collect per-API call timing information.
-
connect_retries
¶ - Type
integer
- Default
<None>
The maximum number of retries that should be attempted for connection errors.
-
connect_retry_delay
¶ - Type
floating point
- Default
<None>
Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.
-
container
¶ - Type
string
- Default
ironic-inspector
Default Swift container to use when creating objects.
-
default_domain_id
¶ - Type
unknown type
- Default
<None>
Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
-
default_domain_name
¶ - Type
unknown type
- Default
<None>
Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.
-
delete_after
¶ - Type
integer
- Default
0
Number of seconds that the Swift object will last before being deleted. (set to 0 to never delete the object).
-
domain_id
¶ - Type
unknown type
- Default
<None>
Domain ID to scope to
-
domain_name
¶ - Type
unknown type
- Default
<None>
Domain name to scope to
-
endpoint_override
¶ - Type
string
- Default
<None>
Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.
-
insecure
¶ - Type
boolean
- Default
False
Verify HTTPS connections.
-
keyfile
¶ - Type
string
- Default
<None>
PEM encoded client certificate key file
-
max_version
¶ - Type
string
- Default
<None>
The maximum major version of a given API, intended to be used as the upper bound of a range with min_version. Mutually exclusive with version.
-
min_version
¶ - Type
string
- Default
<None>
The minimum major version of a given API, intended to be used as the lower bound of a range with max_version. Mutually exclusive with version. If min_version is given with no max_version it is as if max version is “latest”.
-
password
¶ - Type
unknown type
- Default
<None>
User’s password
-
project_domain_id
¶ - Type
unknown type
- Default
<None>
Domain ID containing project
-
project_domain_name
¶ - Type
unknown type
- Default
<None>
Domain name containing project
-
project_id
¶ - Type
unknown type
- Default
<None>
Project ID to scope to
Deprecated Variations¶ Group
Name
swift
tenant-id
swift
tenant_id
-
project_name
¶ - Type
unknown type
- Default
<None>
Project name to scope to
Deprecated Variations¶ Group
Name
swift
tenant-name
swift
tenant_name
-
region_name
¶ - Type
string
- Default
<None>
The default region_name for endpoint URL discovery.
-
retriable_status_codes
¶ - Type
list
- Default
<None>
List of retriable HTTP status codes that should be retried. If not set default to [503]
-
service_name
¶ - Type
string
- Default
<None>
The default service_name for endpoint URL discovery.
-
service_type
¶ - Type
string
- Default
object-store
The default service_type for endpoint URL discovery.
-
split_loggers
¶ - Type
boolean
- Default
False
Log requests to multiple loggers.
-
status_code_retries
¶ - Type
integer
- Default
<None>
The maximum number of retries that should be attempted for retriable HTTP status codes.
-
status_code_retry_delay
¶ - Type
floating point
- Default
<None>
Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.
-
system_scope
¶ - Type
unknown type
- Default
<None>
Scope for system operations
-
tenant_id
¶ - Type
unknown type
- Default
<None>
Tenant ID
-
tenant_name
¶ - Type
unknown type
- Default
<None>
Tenant Name
-
timeout
¶ - Type
integer
- Default
<None>
Timeout value for http requests
-
trust_id
¶ - Type
unknown type
- Default
<None>
ID of the trust to use as a trustee use
-
user_domain_id
¶ - Type
unknown type
- Default
<None>
User’s domain id
-
user_domain_name
¶ - Type
unknown type
- Default
<None>
User’s domain name
-
user_id
¶ - Type
unknown type
- Default
<None>
User id
-
username
¶ - Type
unknown type
- Default
<None>
Username
Deprecated Variations¶ Group
Name
swift
user-name
swift
user_name
-
valid_interfaces
¶ - Type
list
- Default
['internal', 'public']
List of interfaces, in order of preference, for endpoint URL.
-
version
¶ - Type
string
- Default
<None>
Minimum Major API version within a given Major API version for endpoint URL discovery. Mutually exclusive with min_version and max_version